Step by Step Guide to Mount WR-3 Plus Wind Sensor on Mounting Bracket
Follow the 5 steps below to mount your wind sensor on the WR- 3 Plus mounting bracket:
Prepare the following for installation:
- Wind cups
- Sensor
- Hex key
- Self-leveling bracket
Step 1: Loosen the clamp of the mounting bracket.
Step 2: Place WR3-Plus wind sensor into the mounting clamp.
Step 3: Fasten the screw of the clamp
Step 4: Install the wind cup on top of the wind sensor until you hear the “click” sound to make sure it is properly installed.
Step 5: Attach the bracket into the desired placement point at your crane.
You can also watch the full video tutorial here.
If you are looking for a cost-effective and durable wireless anemometer solution, check the available product options here.
